[RECOVERY] Cannibal Open Touch v1.2 (latest update: 06/24/2012)

[wormy987123]

I figured it was something like that, just wanted to put it out there just in case it wasent.

Sent from my LG-LS670 using Tapatalk 2

 

[blackops1125]

over adb or terminal emulator? i think the output only appears in term emulator....

Both.

Sent from my LS670 using Android Central Forums

 

[rebel69ization]

Drew I flashed mrgs mirage for optimus v with 1.0.5 with no prob

sent from my icy cold optimus using inverted T.T.2

 

[Seditec]

Just something I noticed it doesn't keep my theme after I flash a zip or reboot back to recovery is that normal or just my install also I used a modes script from the zvjrec application to flash could that have anything to do with it

Sent from my LS670

 

[Pkt_Lnt]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

Drew, trying to flash tdm's new LS670 build in Cannibal 1.06

Here is what I get:

LS670-cm9-beta1pre1.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "thunderc" || getprop("ro.build.product") == "thunderc" ||
assert failed: getprop("ro.product.device") == "LS670" || getprop("ro.build.product") == "LS670" ||
E:Error in /sdcard/quattrimus-LS670-cm9-beta1pre1.zip
(Status 7)
Installation aborted.

tdm is asking me - "What are the values of these props in your recovery?"

All I see is what I typed above, any suggestions?

 

[BuggerZ]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

Drew, trying to flash tdm's new LS670 build in Cannibal 1.06

Here is what I get:

LS670-cm9-beta1pre1.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "thunderc" || getprop("ro.build.product") == "thunderc" ||
assert failed: getprop("ro.product.device") == "LS670" || getprop("ro.build.product") == "LS670" ||
E:Error in /sdcard/quattrimus-LS670-cm9-beta1pre1.zip
(Status 7)
Installation aborted.

tdm is asking me - "What are the values of these props in your recovery?"

All I see is what I typed above, any suggestions?

Read this post.

 

[Pkt_Lnt]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

Read this post.

Thanks, it loops me right back to here. What is the post # you reference?

 

[BuggerZ]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

Use this at the end of the current URL: #post1854804

 

[Pkt_Lnt]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

Use this at the end of the current URL: #post1854804

And at the upper right of your post is shows #168 in this thread.

That post number 1854804 is an absolute number for the entire forums software. Forum searches will not work with those numbers, I just tried.

 

[BuggerZ]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

At the end of the current URL it takes you to this post. Anyways, I just quoted it for you. Follow the posts back and I think it leads to TDM's asserts failing like this, then the OP saying the following. Anyways, considering the following, it's probably safe to say we'll have to edit TDM's ROM instead of getting it fixed here in Cannibal, seeing Cannibal is for the S, not V. :/

Oh, you're on an Optimus V. I definitely can't help you there. This copy of Cannibal Open Touch is for the Optimus S (LS670) ONLY.

 

[Buddlespit]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

Lol... I thought you were going to quote the post about how thekraven's port wasn't set up correctly for the recovery. Instead, you quote something about the OptiV being incompatable. BTW, LS670 is an OptiS

 

[Pkt_Lnt]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

At the end of the current URL it takes you to this post. Anyways, I just quoted it for you. Follow the posts back and I think it leads to TDM's asserts failing like this, then the OP saying the following.

I am on an Optimus S (LS670), using Cannibal for Optimus S (LS670).

tdm is now building for Optimus S (LS670)
http://forums.androidcentral.com/op...rom-alpha-quattrimus-ics-152.html#post1855002
Post #6062.

Here is the file link.
Goo.im Downloads - Browsing LS670

The LG Optimus S is known as the LS670 or thunderc, all those are in the errors I typed.

Thanks for the attempt. I am trying to flash and Optimus S ROM on an Optimus S phone using an Optimus S recovery.

 

[BuggerZ]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

I am on an Optimus S (LS670), using Cannibal for Optimus S (LS670).

tdm is now building for Optimus S (LS670)

Here is the file link.
Goo.im Downloads - Browsing LS670

The LG Optimus S is known as the LS670 or thunderc, all those are in the errors I typed.

Thanks for the attempt. I am trying to flash and Optimus S ROM on an Optimus S phone using an Optimus S recovery.

Apologies. I saw that but it didn't register lol. Since I'm using V I'll probably get those errorrs too though.. Too bad, I liked this recovery. Optimus V users need one of these.

 

[gollum18]

Hey drew if it helps this is what I get when I try to download.


Sent from my LG-LS670 using Android Central Forums

 

[BuggerZ]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

Hey drew if it helps this is what I get when I try to download.


Sent from my LG-LS670 using Android Central Forums

Ya. I fixed that by long tapping the link and pressing "Save link". Server isn't requesting you to download the file like it should be, is all,

 

[ThatGuyLurkin]

Re: [RECOVERY] Cannibal Open Touch v1.0 (It's....ALIVE!)

There's a guide here: HOWTO: Unpack, Edit, and Re-Pack Boot Images - Android Wiki

If you're on Linux, a handy little program called abootimg will help

Finally decided to click on this. I don't understand it. I want to take apart a Boot.img for the image after the LG sign. the RLE thing I believe.

I want to take it apart on a PC and replace files after editing.

Please and thank you.

 

[BuggerZ]

Re: [RECOVERY] Cannibal Open Touch v1.0 (It's....ALIVE!)

Finally decided to click on this. I don't understand it. I want to take apart a Boot.img for the image after the LG sign. the RLE thing I believe.

I want to take it apart on a PC and replace files after editing.

Please and thank you.

I made a bunch of scripts to pack, unpack, convert to png, etc. You might find them useful. Only works on Linux btw.

 

[wormy987123]

Re: [RECOVERY] Cannibal Open Touch v1.0.6 (GooManager support!)

im not sure if its a bug or not but if I start to install a rom and want to un-plug my phone its like the recovery does a hot boot back in to its self and will not install anything till i re format everything again

 

[jstntp]

im not sure if its a bug or not but if I start to install a rom and want to un-plug my phone its like the recovery does a hot boot back in to its self and will not install anything till i re format everything again

Honestly, during the actual install process of anything from recovery, I would not advise even touching the phone. Interrupting a flash like that can cause all sorts of issues. Last thing you want is a brick, so I would advise setting the phone down and let it do its thing.

 

[drewwalton19216801]

Hey drew if it helps this is what I get when I try to download.


Sent from my LG-LS670 using Android Central Forums

Use the mirror.