UXToolkit HTC One XL (AT&T)

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

Whenever I run this, when I get to this part: C:\EZToolkit Cloud Evita\Bootloader\MotoChopper>adb shell "/data/local/tm p/xpwn"

[+] This may take a few minutes.

[+] Success!

I get a "failure" message every time. Anyone know what I'm doing wrong? I have the hboot 2.14.0000 and 3.18 firmware, adb and htc drivers installed.

Run motochopper a few times. If not, reboot your computer and try again.

Sent from my AT&T One X running CodefireX ROM Android Version 4.4.

 

[cyanjustice]

Re: EZToolkit Cloud Evita One XL (AT&T)

Run motochopper a few times. If not, reboot your computer and try again.

Sent from my AT&T One X running CodefireX ROM Android Version 4.4.

Okay, I'll do that now.

 

[cyanjustice]

Re: EZToolkit Cloud Evita One XL (AT&T)

Run motochopper a few times. If not, reboot your computer and try again.

Sent from my AT&T One X running CodefireX ROM Android Version 4.4.

Don't mean to double post, but hey, it worked! I didn't think it would just take a few tries.... thanks!

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

Don't mean to double post, but hey, it worked! I didn't think it would just take a few tries.... thanks!

No problem!

Sent from my AT&T One X running CodefireX ROM Android Version 4.4.

 

[tOSURox]

Re: EZToolkit Cloud Evita One XL (AT&T)

OK Wizzrah..I Flashed the 2.6.3.0.4.4 Recovery...How do I know if it went well...?

Ad whats My Next Step...

If I choose a ROM with Sense 5..Are the Drawbacks Still..... Bad Battery Consumption/Life and WIFI Problems...

ALSO..I went to the Website for CodeFireX and Registered...But I cant Find A DownLoad Link...

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

You don't have to register. They have a link on the post they have on XDA.

Sent from my AT&T One X running CodefireX ROM Android Version 4.4.

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

OK Wizzrah..I Flashed the 2.6.3.0.4.4 Recovery...How do I know if it went well...?

Ad whats My Next Step...

If I choose a ROM with Sense 5..Are the Drawbacks Still..... Bad Battery Consumption/Life and WIFI Problems...

ALSO..I went to the Website for CodeFireX and Registered...But I cant Find A DownLoad Link...

I would try a stock ROM first.

Sent from my AT&T One X running CodefireX ROM Android Version 4.4.

 

[tOSURox]

Re: EZToolkit Cloud Evita One XL (AT&T)

Stock Rom it is Then...I Value your Advice....Point me to any easy Ones To Try...

I found something called CleanRom.....Its supposedly AT&Ts Stock Rom
A 6.5 and 7.0..

Id Just Like to Try them and Learn from them...What do you think...

 

[tOSURox]

Re: EZToolkit Cloud Evita One XL (AT&T)

My Last question for a Few Hours ...How do you Load the New ROM.... Using the Toolkit...?

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

My Last question for a Few Hours ...How do you Load the New ROM.... Using the Toolkit...?

You don't need the toolkit. Just drag the ROM into your phone, boot into recovery, and flash it.

Sent from my AT&T One X running CodefireX ROM Android Version 4.4.

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

Stock Rom it is Then...I Value your Advice....Point me to any easy Ones To Try...

I found something called CleanRom.....Its supposedly AT&Ts Stock Rom
A 6.5 and 7.0..

Id Just Like to Try them and Learn from them...What do you think...

I had trouble with Cleanrom. I stuck with it for a while but got sick and tired of the bootloops.

 

[tOSURox]

Re: EZToolkit Cloud Evita One XL (AT&T)

Well I flashed the 7.0 Rom CleanRom It seems Ok ..But There always seems to be a problem Now I cant get it to Sync with my Computer...

Ie Been Using wondershare Mobile Go...Darnit...

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

Well I flashed the 7.0 Rom CleanRom It seems Ok ..But There always seems to be a problem Now I cant get it to Sync with my Computer...

Ie Been Using wondershare Mobile Go...Darnit...

If you flashed Cleanrom 7, you should flash a kernel for the most stable experience.

Your two choices are Beastmode kernel and Elementalx.

 

[tOSURox]

Re: EZToolkit Cloud Evita One XL (AT&T)

If you flashed Cleanrom 7, you should flash a kernel for the most stable experience.

Your two choices are Beastmode kernel and Elementalx.

How do you flash a Kernel..the Toolkit or the same way you flash a ROM..?

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

How do you flash a Kernel..the Toolkit or the same way you flash a ROM..?

Same way you flash a rom. Drag the kernel to your phone's storage and flash in recovery. Also, if you decide to flash a different rom, make sure you wipe in recovery before flashing. Just a factory reset is fine.

 

[arze176]

Re: EZToolkit Cloud Evita One XL (AT&T)

Just as an fyi if it still applies wizzrah can confirm
Kit kat roms need newer versions of twrp or clockworkmod.
Sense 5 roms will have signal drops and random reboots unless flashing beastmode or elemental x kernels with them.
Kernel flashing is the same as rom flashing.
What I did to be safe is flash rom then after I would let the rom boot completely then let sit for a couple minutes without touching anything. Then reboot to recovery wipe cache and dalvik cache and flash kernel.
What helped the most as over thinking. I would power off device instead of rebooting. While off waited a couple minutes then powered on.
This worked with beastmode, elemental x on stock sense based roms
Also on torched kernel for kit kat roms.
I had a lot of success with these combos
Magio (sense 5 based rom) + beastmode kernel
Omni rom (aosp kit kat cm11 hybrid) + torched kernel.
Just sharing if helpful please give thanks

Sent from my SM-N900T using AC Forums mobile app

 

[arze176]

Re: EZToolkit Cloud Evita One XL (AT&T)

Well I flashed the 7.0 Rom CleanRom It seems Ok ..But There always seems to be a problem Now I cant get it to Sync with my Computer...

Ie Been Using wondershare Mobile Go...Darnit...

What do you mean by sync with computer? Is the device being recognized when connecting to pc?
Or are you talking about the htc sync adapter that showed when you previously connected to pc.
If so it might be disabled by developer for that rom. Idk if thats the case because I never tried clean rom

Sent from my SM-N900T using AC Forums mobile app

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

Just as an fyi if it still applies wizzrah can confirm
Kit kat roms need newer versions of twrp or clockworkmod.
Sense 5 roms will have signal drops and random reboots unless flashing beastmode or elemental x kernels with them.
Kernel flashing is the same as rom flashing.
What I did to be safe is flash rom then after I would let the rom boot completely then let sit for a couple minutes without touching anything. Then reboot to recovery wipe cache and dalvik cache and flash kernel.
What helped the most as over thinking. I would power off device instead of rebooting. While off waited a couple minutes then powered on.
This worked with beastmode, elemental x on stock sense based roms
Also on torched kernel for kit kat roms.
I had a lot of success with these combos
Magio (sense 5 based rom) + beastmode kernel
Omni rom (aosp kit kat cm11 hybrid) + torched kernel.
Just sharing if helpful please give thanks

Sent from my SM-N900T using AC Forums mobile app

Upgraded him to the custom recovery ^^

- - - Updated - - -

What do you mean by sync with computer? Is the device being recognized when connecting to pc?
Or are you talking about the htc sync adapter that showed when you previously connected to pc.
If so it might be disabled by developer for that rom. Idk if thats the case because I never tried clean rom

Sent from my SM-N900T using AC Forums mobile app

I was with cleanrom for like 4 months

 

[tOSURox]

Re: EZToolkit Cloud Evita One XL (AT&T)

I got pretty much everything to work..This is Pretty SLICK.....It was the DeBugging mode I tapped it a few times and It worked...

Hey Wizzrah can I send you some $$$$...Your My New Pal...

a Quick Question... when you go from Rom to Roms do you need to do a COMPLETE RESET of the phone..Also Do you need to Fasch Kernels B4 you Flash The Rom or can you do it in reverse order... Let me Knw I want to try Better Roms In the Near future

 

[wizzrah]

Re: EZToolkit Cloud Evita One XL (AT&T)

I got pretty much everything to work..This is Pretty SLICK.....It was the DeBugging mode I tapped it a few times and It worked...

Hey Wizzrah can I send you some $$$$...Your My New Pal...

a Quick Question... when you go from Rom to Roms do you need to do a COMPLETE RESET of the phone..Also Do you need to Fasch Kernels B4 you Flash The Rom or can you do it in reverse order... Let me Knw I want to try Better Roms In the Near future

I'll have a paypal link up eventually (None for now). When moving from ROM to ROM, you need to wipe in recovery. Just a factory reset. It will wipe the ROM and other mods, but not your SD Card/Internal Storage. Everything there should be safe. You flash kernels after you flash the rom.